| 电压规律 |
| 添加时间：2019/4/20 17:08:48 浏览次数： |
| 电压是推动电荷定向移动形成电流的原因。电流之所以能够在导线中流动，也是因为在电流中有着高电势和低电势之间的差别。这种差别叫电势差，也叫电压。换句话说。在电路中，任意两点之间的电位差称为这两点的电压。通常用字母V代表电压。 Voltage is the reason that drives the charge to move directionally to form current. The reason why the zuhehuati.89ix.comguandao.89ix.comhuanwanggui.89ix.compeidiangui.89ix.comcurrent can flow in the youle.89ix.comhuatiw.89ix.comconductor is also because there is a difference between high potential and low potential in the current. This difference is called potential difference, or voltage. Let me put it another way. In a circuit, the potential difference between any two points is called the voltage between the two points. The letter V is usually used to represent the voltage. 电源是给用电器两端提供电压的装置。电压的大小可以用电压表（符号：V）测量。 The power supply is a device that provides voltage to both ends of an electrical appliance. Voltage can be measured by a voltmeter (symbol: V). 串联电路电压规律：串联电路两端总电压等于各部分电路两端电压和。 Voltage Law of Series Circuit: The total voltage at both ends of Series Circuit is equal to the sum of the voltage at both ends of each part of Circuit. 公式：ΣU=U1+U2 Formula: U = U1 + U2 并联电路电压规律：并联电路各支路两端电压相等，且等于电源电压。 Voltage law of parallel circuit: The voltage of each branch of parallel circuit is equal and equal to the voltage of power supply. 公式：ΣU=U1=U2 Formula: U = U1 = U2 欧姆定律：U=IR（I为电流，R是电阻）但是这个公式只适用于纯电阻电路 Ohm's Law: U = IR (I is current, R is resistance), but this formula only applies to pure resistance circuits. 串联电压之关系，总压等于分压和，U=U1+U2. The total voltage is equal to the sum of partial voltage, U = U1 + U2. 并联电压之特点，支压都等电源压，U=U1=U2 Parallel voltage characteristics, branch voltage are equal supply voltage, U = U1 = U2 |
| 上一页 低电压保护的用途 |
| 下一页 防雷过电压保护器优点 |
Copyright © 技术支持：遨游网络