联系我们

公司名称:XXX

电话:XXX

手机:XXX

联系人:XXX

地址:XXX

新闻动态
螺杆空压机机械故障的预防处理
螺杆空压机机械故障的预防处理
Prevention and Treatment of Mechanical Faults of Screw Air Compressor
1、螺杆空压机工作原理:
1. Working principle of screw air compressor:
螺杆空压机主要部件有:空气过滤器,低压转子,中间冷却器,电子马达,高压转子,后冷却器,传动部件,齿轮箱,调节器控制系统,安全阀及消音外壳等。
The main components of the screw air compressor include: air filter, low-pressure rotor, intercooler, electronic motor, high-pressure rotor, aftercooler, transmission components, gearbox, regulator control system, safety valve, silencing shell, etc.
2、常见故障及处理
2. Common faults and solutions
2.1空气输出温度过高
2.1 The air output temperature is too high
(1)降低空气输入温度。增加空压机房的通风,在空压机房的房顶加排气罩,用来排除热气,控制室内温度不要过高,特别在炎热的夏季,空压机房的温度不要超过40℃。
(1) Reduce the air input temperature. Increase the ventilation of the air compressor room, and add an exhaust hood on the roof of the air compressor room to remove hot gas. The temperature in the control room should not be too high, especially in hot summer, the temperature in the air compressor room should not exceed 40 ℃.
(2)降低冷却水的输入温度,冬季水温保持在18石家庄电动伸缩门 保定桌椅  保定水处理设备 河北机械加工 北京电动门  保定养老院  保定防水℃,夏季水温保持在24℃。
(2) Reduce the input temperature of cooling water, and keep the water temperature at 18 ℃ in winter and 24 ℃ in summer.
(3)增加冷却水的流量,经测算,冷却水输入温度和输出温度差l5℃,冷却水流量为3.7升/秒。
(3) Increase the flow of cooling water. According to the calculation, the difference between the input temperature and output temperature of cooling water is 15 ℃, and the flow of cooling water is 3.7 L/s.

联系方式

  1. 公司名称:XXX
  2. 电话:XXX
  3. 手机:XXX
  4. 联系人:XXX
  5. 地址:XXX

版权 © 湖北武汉空压机诚信厂  网址:baohuqi.07858.net  推荐:武汉空压机,武汉螺杆空压机,武汉变频空压机

钢纤维 成都地暖 流水槽模具 400电话怎么申请开通 网站建设哪家好